Description
📋 Key Features:
-
🎨 Individually Addressable WS2812B LEDs – Control each LED independently
-
💡 Ultra High Density – 144 LEDs per meter for smooth lighting
-
🌈 Full RGB Spectrum – Millions of vibrant color combinations
-
🔄 Integrated Driver IC – Each LED has built-in WS2812B driver
-
💧 Waterproof IP67 – Protected in a silicone sheath for outdoor use
-
🔌 Flexible & Cuttable – Customize the length for any project
-
⚙️ Compatible with Arduino, ESP32, Raspberry Pi and more
-
🔋 Low Voltage (5V DC) – Energy efficient and safe to use
📐 Technical Specifications:
Parameter | Specification |
---|---|
LED Type | WS2812B (5050 SMD with built-in IC) |
Color | RGB (24-bit, 16.8 million colors) |
LED Density | 144 LEDs per meter |
Length | 1 Meter |
Voltage | 5V DC |
Current Draw | ~4.3A per meter (at full brightness) |
Power Consumption | ~21.5W per meter |
Data Protocol | One-wire, 800kHz timing signal |
Waterproof Rating | IP67 (Silicone-coated) |
Cuttable | Every LED (indicated on strip) |
Strip Width | ~12mm (including waterproof casing) |
Connection Type | 3-pin JST-SM connector (input/output) |
PCB Color | White or Black (based on stock) |
🎯 Applications:
-
Arduino & ESP32 LED Projects
-
Interactive Art Installations
-
Ambilight for TVs and Monitors
-
DIY Smart Lighting and Home Decor
-
Wearable Technology (with silicone protection)
-
Mood Lighting, Signage, and Display Effects
-
Stage & Event Lighting
❓ Frequently Asked Questions (FAQs):
Q1. Can I control this LED strip with Arduino?
Yes, you can easily control it using Arduino libraries like Adafruit NeoPixel or FastLED.
Q2. How do I power the strip?
Use a regulated 5V DC power supply capable of handling at least 4.5A for full brightness.
Q3. Is the strip flexible and cuttable?
Yes. You can cut it at each LED segment (look for the cut lines). It’s also bendable for curved surfaces.
Q4. What is IP67 rating?
IP67 means the strip is protected from dust and can withstand water immersion up to 1 meter for 30 minutes.
Q5. Can I chain multiple strips together?
Yes, using the 3-pin connectors. But be sure to power each meter separately to avoid voltage drop.
Reviews
There are no reviews yet.