Description
📋 Key Features:
-
🎨 Individually Addressable RGB LEDs – Full control of each LED
-
💡 Ultra High Density – 144 LEDs per meter for detailed effects
-
💧 Epoxy Coated IP65 Waterproof – Splash-proof and dust resistant
-
🔄 Built-in WS2812B Drivers – Single-wire control per LED
-
⚡ Flexible and Cuttable Strip – Easily fits into tight or custom layouts
-
🔌 Compatible with Arduino, ESP32, Raspberry Pi, and more
-
🌈 Millions of Colors – Full 24-bit RGB output
-
🔋 Low Voltage Operation (5V DC) – Safe and efficient
📐 Technical Specifications:
| Parameter | Specification |
|---|---|
| LED Type | WS2812B (5050 RGB SMD with driver IC) |
| Color Output | RGB (24-bit, 16.8 million colors) |
| LED Density | 144 LEDs per meter |
| Length | 1 Meter |
| Input Voltage | 5V DC |
| Current Draw | ~4.3A per meter (all LEDs on full white) |
| Power Consumption | ~21.5W per meter |
| Data Protocol | One-wire (800kHz signal) |
| Waterproofing | IP65 (Epoxy-coated surface) |
| Strip Width | ~10mm |
| Cutting Interval | Every LED (cut marks present) |
| Connector Type | 3-pin JST-SM or tinned ends |
| PCB Color | White or Black (based on stock) |
🎯 Applications:
-
Arduino NeoPixel projects
-
Smart LED lighting for interiors
-
Interactive lighting installations
-
Mood and decorative lighting
-
Ambilight for monitors or TVs
-
Signage and edge lighting
-
Custom PC case lighting
-
DIY wearables (splash-proof use)
❓ Frequently Asked Questions (FAQs):
Q1. What’s the difference between IP65 and IP67 LED strips?
IP65 has an epoxy coating (splash resistant), suitable for indoor and light moisture environments. IP67 is silicone-encased and can withstand immersion.
Q2. Can I cut and rejoin this LED strip?
Yes, each LED has a marked cutting point. Use connectors or solder wires to rejoin segments.
Q3. Is it safe for outdoor use?
It can handle humidity and splashes but not full submersion. For outdoor projects, IP67 or IP68 is recommended.
Q4. How do I power the strip?
Use a regulated 5V DC power supply capable of handling at least 5A per meter.
Q5. What controllers are compatible?
It works perfectly with Arduino, ESP32, Raspberry Pi, STM32, and other microcontrollers that support NeoPixel or FastLED libraries.
Reviews
There are no reviews yet.